Whiten with the roller

The roller allows you to paint large areas quickly. Remember to treat one square meter at a time and to cross the sense of the hands on the ceiling to get a better coverage.

Here are the stages of the whitening:

      
1. Create a frame around the wall, ceiling and sockets using the brush because the roller can not cover the convex corners of the room
      
2. Pour into the appropriate paint tray enough to wet the roller and slide it on the grid until the excess paint has been removed
      
3. Always start from above, then first the ceiling, then the walls starting at the top
      
4. Remember to slightly overlap the passes to even out the effect and treat areas of about 1 square meters at a time
      
5. Recharge the roller and resume painting without too much pressure and without going too quickly because you could create drips.
      
6. For the high parts used the extension, it is more practical.